COMPACT TRACTORS Front steering

Why Cabrio?

Cabrio compact tractors with a front steering axle can be used in agriculture, municipal, forestry, viticulture, orchards or transport. These tractors are applicable for you if you need the stability of the set and better keeping track in a row, especially when you are working with front loaders, ditch mulchers or if you are working in the woods.


Compact tractors with a front steerable axle are produced in two variants, Comfort and Excellent, and in five power versions. The smallest power version is a diesel four-cylinder mechanically controlled, water-cooled Lombardini engine with an output of 26HP. Another type includes also a diesel water-cooled engine, but it is already electrically controlled HATZ engine in two power versions 26HP and with a DPF filter 57HP. There are also two power versions of the Kubota four-cylinder electrically controlled engine on offer, with an output of 50HP and 60HP. The tractors are equipped with a mechanical fully synchronized transmission with 8 forward speeds and 8 reverse speeds with a maximum speed of 30 km / h. The power transmission is provided by a single-disc dry clutch and, on request, a two-stage dry clutch. This tractor has permanent 4x4x wheel drive with rear and front lock. The brakes are dry disc inside the rear case. The tractors are equipped with a front three-point hitch of category 1N and a rear three-point hitch of category 1., front PTO 1000 rpm and rear PTO 540-1000 rpm. Hydraulic circuits operated from the driver's seat can be 2–5 circuits with pumps with a capacity of 16–35 l / min.


Compact tractors are homologated and approved for operation on roads.
 

Do you need a technical consultation?
Contact us by phone or e-mail.
Contact us